The Drummond Geometry Forum

Would like to use the 1-1 point from a Monthly chart project a zone onto a Weekly chart using the Drummond Geometry Pro software package. Have attached a screen shot. Is this possible?

What is the typical lead time for a response?

Sure this can be done, thou not exactly in the precise manner as your illustration, since you are suggesting that a "point" can be expanded into a "zone", and the software cannot do that unassisted (i.e would require some custom programming). But transferring the monthly 1-1 high to a daily chart is easy. And conversely if you are talking about transferring a monthly 1-1 high "zone" onto a daily chart that can be done, since you would be moving a "zone" on one chart to a "Zone " on another chart.
Do this:
1) Insert a second copy of the DG2c_Pro on you your chart;
2) set the Plott input to 2 (This enables the "custom inputs" at the bottom of the input panel an invalidates the rest of the inputs)
3) set the custom input 1 to the following : "moLH11" ("Monthly live 1-1High") Note that the custom inputs will accept any specification from the full DG database. See the database documentation on the dg2c_Plot product webpage for detail.
4) Set the style of the heaviest weight, and specify a line, cross, right-tick etc for the visual display you prefer.
5) That's it!